3D Printing service - half print volume height
Bored Owl has several Bambu lab printers which we’re opening up to makers as a prototyping service.
Here are the requirements for this service:
The 3D Model MUST be formatted as an STL file.
Your model must fit on a single printer bed (that is 256 × 256 × 128 mm) Note: 128mm is maximum height for this half print volume service. Choose our large print service if larger print height is required. Note: We don’t mind if you fill the printer bed if you want duplicates of the model so long as its not taller or heavier than the limits we set.
Wall thickness must be 0.4mm or greater.
We will use 20% infill for the inner sections of the model.
If there are overhangs or features that require overhangs, then we will include support material automatically. We do not remove support material once finished, that's up to you!
We use PLA for this service. We will ask your colour preference but we’ll offer from the range of PLA we have in stock.
This service is non-refundable. If your design contains errors or omissions then they will be committed to fabrication and are subject to the constraints of 3D printing.
During checkout choose either pickup in store from Bored Owl in Unanderra, OR select shipping and provide your full address details.
After we receive your order for this service online we’ll email you to request the digital file.
Bored Owl has several Bambu lab printers which we’re opening up to makers as a prototyping service.
Here are the requirements for this service:
The 3D Model MUST be formatted as an STL file.
Your model must fit on a single printer bed (that is 256 × 256 × 128 mm) Note: 128mm is maximum height for this half print volume service. Choose our large print service if larger print height is required. Note: We don’t mind if you fill the printer bed if you want duplicates of the model so long as its not taller or heavier than the limits we set.
Wall thickness must be 0.4mm or greater.
We will use 20% infill for the inner sections of the model.
If there are overhangs or features that require overhangs, then we will include support material automatically. We do not remove support material once finished, that's up to you!
We use PLA for this service. We will ask your colour preference but we’ll offer from the range of PLA we have in stock.
This service is non-refundable. If your design contains errors or omissions then they will be committed to fabrication and are subject to the constraints of 3D printing.
During checkout choose either pickup in store from Bored Owl in Unanderra, OR select shipping and provide your full address details.
After we receive your order for this service online we’ll email you to request the digital file.
Bored Owl has several Bambu lab printers which we’re opening up to makers as a prototyping service.
Here are the requirements for this service:
The 3D Model MUST be formatted as an STL file.
Your model must fit on a single printer bed (that is 256 × 256 × 128 mm) Note: 128mm is maximum height for this half print volume service. Choose our large print service if larger print height is required. Note: We don’t mind if you fill the printer bed if you want duplicates of the model so long as its not taller or heavier than the limits we set.
Wall thickness must be 0.4mm or greater.
We will use 20% infill for the inner sections of the model.
If there are overhangs or features that require overhangs, then we will include support material automatically. We do not remove support material once finished, that's up to you!
We use PLA for this service. We will ask your colour preference but we’ll offer from the range of PLA we have in stock.
This service is non-refundable. If your design contains errors or omissions then they will be committed to fabrication and are subject to the constraints of 3D printing.
During checkout choose either pickup in store from Bored Owl in Unanderra, OR select shipping and provide your full address details.
After we receive your order for this service online we’ll email you to request the digital file.
